Selcoplast Cables is committed to supplying its customers with the highest quality of products and of services.
Selcoplast Cables have undergone rigorous type testing by its Factory Laboratory, Engineering Consulting and Studies Center in Faculty of Engineering and fully conforms to IEC 227-228 for Wires and cables, and Egyptian Standards 182-1995Materials & Constructions
Most of the standard types of cable that Selcoplast manufactures are listed in this catalog. However, a large variety of other sizes and types of cable can be produced. This variety is due to the availability of a number of options with regard to materials or assembly techniques at each stage of manufacture. thus, cables can be manufactured to suit a particular application by modifying standard type or by combining selected features of several types of cable.
Conductors
Insulation
Assembly
Cable Identification
PVC
Ordering Advice
The following technical details will ensure that your enquirers and orders are dealt with quickly and efficiently :
- Length of cables required and individual drum length*.
- Voltage designation.
- Relevant Egyptian or international standard
- Number of cords.
- Conductor size and . where applicable.
- Conductor material i.e.Copper, aluminum.
- Type of insulation.
- Any other requirement e.g Circular conductors, special PVC sheath material,drum weight limitations, operating environment.
Cable are normally supplied in length of 100 meter up to & including 95 mm2 and 500 meter for 120, 150. 185 & 300 mm2.
Other length can be supplied if required
